FMC-HPC Mezzanine Card

Important Note:

We recommend that you buy this product through our worldwide distributor, Mouser Electronics. Please click on the following link for more details: FMC-HPC Mezzanine Card



General Description

The Zipcores FMC-HPC Mezzanine card is a versatile FMC breakout-board and prototyping platform that conforms to the ANSI/VITA 57.1 FMC™ mezzanine standard. The card is compatible with a wide range of base-boards and FMC-compliant systems. Examples include evaluation boards from AMD® (Xilinx), Altera® (Intel), Microchip® (Microsemi), Avnet® and Digilent®. The card provides passive connectivity to all 400 signals on the FMC (HPC) connector via 10 x standard 0.100" pitch (2.54 mm) headers. The differential pairs are balanced for track length and impedance-matched for 100Ω LVDS termination. The ground pins of the FMC are also connected to an independent ground plane to offer the best possible signal integrity and noise immunity.

Key Design Features

- Standard ANSI/VITA 57.1 FMC™ HPC connector
- Also compatible with the latest FMC+ connectors featured on the newest evaluation boards
- 10 x headers provide passive connectivity to every pin on the HPC connector (rows A to K)
- All pin and through-hole spacings are standard 0.100” pitch or 2.54 mm
- Access to 34 x differential pairs LA[00:33] or 68 x single-ended signals or a mixture of both
- Access to 24 x differential pairs HA[00:23] or 48 x single-ended signals or a mixture of both
- Access to 22 x differential pairs HB[00:21] or 44 x single-ended signals or a mixture of both
- Access to all 10 x MGT transceiver pairs DP[0:9] (C2M and M2C) including both MGT clocks
- Support for massive serial bandwidth of at least 3Gbps+ for each MGT transceiver
- Access to all 4 x user-clock differential pairs
- Access to the I2C, JTAG and special purpose signals
- Access to the VADJ, 3.3V and 12V FMC power supplies
- All differential pairs routed with the same track lengths
- All differential signals impedance-matched for LVDS 100Ω termination
- Separate VADJ, 3.3V, 12V and GND through-hole vias
- Separate power pins de-coupled to ground with 100 nF capacitors
- Separate PCB ground-plane for improved signal integrity and noise immunity
- Features large 24 x 22 prototyping area for custom circuitry and user-defined functions
- 8 x user LEDs with 332Ω series resistors
- 4 x user push-buttons with RC de-bouncing circuit
- 100 MHz low-jitter single-ended clock oscillator
- 2 x M3 mounting holes for securing the FMC connector
- 4 x M3 mounting holes for supporting standoff 'legs' or spacers
- Example RTL source-code provided for easy board bringup
- Compatible with a wide range of FMC base-boards from many manufacturers
- Dimensions 17.0 x 6.8 cm

Base-board compatibility

Generally, ANY evaluation board that features an FMC or FMC+ connector will be compatible with our FMC mezzanine cards. This list shows examples based on AMD® products only:

  SP605, ML605 (LEGACY 6 SERIES)
  ZC702, ZC706 (ZYNQ 7000)
  SP701, AC701, KC705, VC707, VC709, VC7203, VC7215, VC7222 (GENERAL 7 SERIES)
  KCU105, KCU116, VCU108, VCU110, VCU118 (ULTRASCALE and ULTRASCALE+)
  ZCU102, ZCU104, ZCU106, ZCU111, ZCU208, ZCU216, ZCU670 (ZYNQ ULTRASCALE and ULTRASCALE+)
  VMK180, VCK190, VHK158, VPK120, VPK180, VEK280, VEK385 (VERSAL)

Applications

- High-speed LVDS connectivity
- Wide (single-ended) parallel connectivity
- Very-high bandwidth serial links of 3Gbps+ per channel
- Fully custom FMC-card circuit design
- General prototyping on FMC-compatible evaluation boards
- High-speed interfaces where signal integrity is critical
- Examples include image sensors, cameras, displays, ADCs and DACs

View user guide

Your name:	*
Your email:	*
Recipient's email:	*
Add a personal message
		Send to friend

  Powered by Lumino
Copyright © 2008-2026 Zipcores