Home » Peripheral and Serial IF » UART to I2C Bridge Controller

UART to I2C Bridge Controller

UART to I2C Bridge Controller
UART-to-I2C bridge example setup Use of a simple terminal program Example bench setup with AC701
SKU SKU103
$3000.00
Quantity
1 (this product is downloadable)

General Description

Allows simple connectivity between a UART 2-wire port (Tx/Rx) and an I2C compatible bus. Allows simple programming and debug of an I2C device using a remote PC and terminal program.

Key Design Features

- UART compliant with only 2-wires required (Tx/Rx)
- UART baud rates from 9600 to 921600
- UART configurable number of stop bits and parity
- I2C bus support for 100 kbps, 400 kbps, 1 Mbps, 4 Mbps or custom rates
- Configurable I2C slave address
- Provides basic commands to read and write registers on the I2C bus

Applications

- Simple method for translating serial UART commands to I2C
- Essential tool for the remote debug of I2C devices via an external PC and
  a terminal program (e.g.TeraTerm, HyperTerminal, PuTTY, YAT ...)

View datasheet

UART to I2C Bridge Controller

: *
: *
: *
 
 
Floating-point Adder
desc here
$3000.00
UART Serial Interface Controller
desc here
$2000.00
4-Quadrant Arctan Function
desc here
$3000.00
2D Graphics Overlay Module
desc here
$4000.00
Binary-FSK Demodulator
desc here
$6000.00
Floating-point Square-root
desc here
$3000.00
HD-Video Development Board
desc here
$1250.00
ADS-B 978 MHz (UAT) Receiver
desc here
$0.00
Video Interlacer
desc here
$1000.00