I2C Slave Serial Interface Controller

I2C Slave Serial Interface Controller
I2C slave controller architecture I2C data rates of 16 MHz and above
SKU SKU25
$1500.00
Quantity
1 (this product is downloadable)

General Description

Slave serial controller compatible with the popular Philips® I2C standard. Permits an I2C Master to communicate with your FPGA, CPLD or ASIC device via a set of user-defined config and status registers. Supports standard (100 kbits/s), fast (400 kbits/s) and custom rates in excess of 4 Mbits/s.

Key Design Features

- Philips® I2C compliant
- Simple command interface
- Standard, Fast and custom-mode data rates
- Up to 128 separately addressable 8-bit Configuration registers
- Up to 128 separately addressable 8-bit Status registers
- Configurable I2C slave addressing
- 4 MBits/s+ operation

Applications

- I2C slave communication via your FPGA/ASIC
- Inter-chip board-level communications
- Standard 2-wire comms between a wide range of peripherals, MCUs and COTs ICs

View datasheet

I2C Slave Serial Interface Controller

: *
: *
: *
 
 
Floating-point Multiplier
Floating-point Multiplier
desc here
$2500.00
Arctan Function
Arctan Function
desc here
$1500.00
RF-DSP Development Board
RF-DSP Development Board
desc here
$2500.00
VHDL to Verilog translation service
VHDL to Verilog translation service
desc here
$0.00
ADS-B 978 MHz (UAT) Receiver
ADS-B 978 MHz (UAT) Receiver
desc here
$0.00
Motion-adaptive Video Deinterlacer
Motion-adaptive Video Deinterlacer
desc here
$8500.00
Parallel FLASH Memory Controller
Parallel FLASH Memory Controller
desc here
$1500.00
Cosine Function
Cosine Function
desc here
$1500.00
Fixed-point to Floating-point Converter
Fixed-point to Floating-point Converter
desc here
$1500.00